Pressure Decay Leak Detector
FCO750 Leak Detector
General Description
The FCO750 is a pressure decay leak detector that is
suited to applications requiring either multiple test
configurations or flexible control of associated tooling.
The FCO750 can store parameters for 300
products with each product consisting of up to eight
tests in a
sequence. The tests can be any combination of leak tests,
blockage tests, ramp tests or dump tests. All test parameters
are programmable with a wide selection of engineering
units.
Features
Robust steel benchtop case with optional
19" x 3U rack mounting kit
Large Graphics Display 240 X 64 Pixels
with Blue Backlight
Choice of Run Time screens
Test pressure ranges from Vacuum through
to 30bar
• 0.1pa or 0.01 cc/min Leak resolution
• 300 product/test settings
• Dual regulator capability
• Automatic regulation of vacuum and pressure
• Communications via RS232, RS485, USB or LAN
• Maintenance early warning system with Email
alert
• Multiple test types (Leak, Blockage, Ramp, Dump)
• 16 Programmable BCD outputs expandable to 32
(this cuts out the inputs)
• 12 Programmable BCD inputs expandable to 24
• Up to 5 programmable pneumatic outputs
• Datalogger storage of the last 200 test results
• Selflearning function on setup
| LEAK
DIFFERENTIAL PRESSURE MEASUREMENT |
| Accuracy
@ 20 †C |
<
±1% R ± 1 digit |
| Zero |
Automatic |
| PRESSURE
MEASUREMENT |
| Accuracy
@ 20†C |
<
± 1% FSD ± 1 digit |
| Zero
Adjustment |
Semi-automatic |
| For
Complete specifications PDF Click
Here |
|
New
generation
LEAK DETECTOR FCO730
- Entry Level Model
- Cost Effective Leak Test Solution
- Multi-Head Test Capability
- Fully Interfaced With PC’s and
PLC’s
| General
Specifications: |
| Accuracy |
±1%
of reading ± 1 Digit |
| Zero
Adjustment |
Automatic
for leak, semi-auto for pressure |
| Resolution |
Display
1:2000 |
| Temperature
Limits |
Storage:
-20 to 70† C, Working: 0 to 40† C |
| Electrical
Connections |
9
pin D (RS232, 6 way detachable screw terminal (outputs),
6 way detachable screw terminal (inputs), 2 way
detachable screw terminal (power) |
| Supply
Voltage |
24VDC
± 10% |
| Supply
Power |
<500mA |
| Timers |
0.01s
to 999s |
| Air
Supply |
Clean,
dry air |
| Supply
Pressure |
Maximum
16 bar guage, minimum 5 bar guage |
| Overall
Dimensions - Rack Case |
11.2"x10.6"x5.3" |
| Overall
Dimensions - Bench Case |
12.6"x12.4"x6.9" |
| Pneumatic
Connections |
Supply
6mm push in, exhaust pilot 4mm push in, test/reference
1/8" BSPF |
For further information on any of these
instruments, send us a request
by e-mail. Please be sure to specify the instrument
or instruments you want to know more about.
|
